Search results for: '60 1 26'

Product SKU:
WM0021
Throttle Cable Set (Opener & Closer), +12cm compared to OEM
Usage:
SR400'14- (with GibbonSlap- or higher Handlebar/Riser)

€37.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
93614
Stainless Steel Silencer BullSP Mace/Scrambler, with header pipe set item 93613, 93615 or 93616 'E'-approved, WITHOUT mounting material / header pipe
Usage:
SR500 (benötigt Krümmer-Set Art. 93613, 93615 bzw.93616)

€412.34

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
28265
Drain Plug for Carburettor Float Chamber, thread M6x1.00 (matching gasket see item 28310), OEM 5Y1-14115-00
Usage:
XT350-'87(Rundschiebervergaser), XT550, SRX600, TT600-'92, TT600R/RE, XT600-'89, XT600Z-'90

€15.95

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
28140
Rubber Sealing Steering Shaft/Bottom Yoke, fits both Ball Bearing and Taper Steering Bearing (OEM Reference# 164-23462-00)
Usage:
XT250, XV250 VIRAGO, SR400, SR500, TT500, XT500, XV535 VIRAGO, XJ600

€4.77

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
90137
15T Sprocket, Fine Geared Shaft (collar approx. 4mm, total thickness 15.6mm, compare to 27109)
Usage:
TT600RE, XT600E'99- Please check thickness of collar before ordering!

€25.97

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
33136
Front Brake Lever, matt black (Heavy Duty version)
Usage:
XT350, XT600-'86, XT600Z-'85, XTZ660, XTZ750, DT125'85-, DT250'88, TDR250'88, XT250'86

€12.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
21309
HeavyDuty Shock Absorber Mudguard, at air filter box, incl. sturdy bolting mechanism
Usage:
XT600Z-'85 (34L, 55W), XT600-'89 (OEM reference # 34L-21621-00)

€27.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30513B
Handlebar Grip 'Sporty', black anodized aluminium, incl. 4 pcs. fixing screws + 4 pcs. black cover caps
Usage:
SR400FI'14-, SR500, TT500, XT500, TT600E+S (NOT R+RE), XT600/Z/E+K, XTZ660, XTZ750

€48.93

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41585
Replica Strap, Passenger Strap for KEDO 48T Replica Seat (item10127RP), incl. mounting material
Usage:
SR500'84- (as a replacement for the large circumferential passenger handle)

€23.85

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41903
KEDO Speedometer Bracket for 60mm Speedometer & - Tachometer, powder-coated resp. bright anodised, for original ignition switch
Usage:
XT500

€59.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60084S
Mini Luggage Rack, stainless steel black, with brackets and mounting hardware, luggage area 23x15cm, suitable for the short seat (-'79 and '80-) ONLY
Usage:
XT500

€169.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
31312
Cover for Passenger Footrest Stud LH, aluminium black anodized, M12x1.25 thread (covers the bolt at single seat conversion)
Usage:
SR500-'83

€13.25

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
91040
Front Sprocket Locking Tab
Usage:
SR400FI'14-, SR500, TT500, XT500, MT03, XT660R/X, XTZ750, TDM850, TRX850

€3.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
91041
Lock Nut for Front Sprocket (Wrench Size 32mm)
Usage:
SR400FI'14-, SR500, TT500, XT500, SRX600, TT600S/E/R/RE, XT600, MT03, XT660R/X/Z, SZR660, XTZ660, XTZ750, TDM850, TRX850

€6.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
10301
Bolt for Side Stand (for 10mm frame support), short pin for one baffle plate
Usage:
TT500-'78, XT500-'79 (for countries: CH, DK, S)

€18.55

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
21133RP
Replica Front Wheel Axle, Zinc Plated, OEM reference # 583-25181-00
Usage:
TT500-'78, XT500-'79

€62.54

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
21158
Spacer Bushing for Front Wheel Axle, RH (Width 32,5mm), OEM reference # 90387-15720
Usage:
XT500'80-

€8.99

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
10224
M8 Threaded Bushing Set, 2 pieces, 15x15mm, aluminium, with flange and hex-head A/F 13mm (suitable for rear fender, replaces e.g. item 10073)
Usage:
SR500, XT500 (mini-indicators at rear fender mounting spot. In combination with solo-seat ONLY!

€13.25

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30226
Frame Mounting Kit for TM Carburettor, Rubber-Cushioned, Stainless Steel, Complete (17 Pcs.)
Usage:
SR500 with Mikuni TM36/TM40-Carburettor and K&N Racing Air Filter or Alu Intake Funnel

€29.15

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30716
Replica Seat Cover (long version for German type seat) black, seat surface approx. 67cm long, OEM reference # 4E5-24731-00
Usage:
XT500/S'80 (for Seat with Extension)

€32.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41481
6-Way Connector Housing for Rectifier/Regulator 41508, incl. connectors & 1m ground wire 2.5sqmm

€5.25

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41525-9
9-Pin Connector Housing with Snap-In Nose incl. 2x9 Connectors Type 110

€8.43

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41644
Adapter Cable for Accessory License Plate Light, YAMAHA system connector to Japan bullet connectors, length approx. 100cm
Usage:
misc. YAMAHA, e.g. MT-07, XSR700, MT-09, XSR900, XTZ690 (Tenere 700, T700)

€10.49

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41655
Mounting Adapter for Regulator #41111, for mounting on the original fixing points on the battery box
Usage:
SR500-'92

€6.89

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List