New products


Subscribe to the KEDO RSS product feed now and never miss a product release! Still need an RSS reader? Check out these search results on Google.
Filter
Set Descending Direction

636 items

Page
per page
  1. New

    Product SKU:
    22092

    Spacer Washer 0,5 mm for Accessory Swing Arm Bearing (if necessary between dust cap and axle bearing), 1 piece
    Usage:
    SR500, TT500, XT500
    €2.45
    Add to Wish List
    Out of stock
  2. New

    Product SKU:
    22091

    Spacer Washer 1 mm for Accessory Swing Arm Bearing (if necessary between dust cap and axle bearing), 1 piece
    Usage:
    SR500, TT500, XT500
    €2.85
    Add to Wish List
    Out of stock
  3. New

    Product SKU:
    41944

    Mini Flasher Relay 6/12V, electronic, for LED and standard indicators, capacity 12V: 1-30 Watt/6V: 1-15 watt, frequency 85/min, dim. 14x10x7mm
    Usage:
    Recommended for LED indicators. Note switching capacity. Use with indicators <= 0.5W and simultaneous use of an LED indicator indicator light Art. 41340
    €22.50
    Incl. 19% VAT,excl. Shipping Cost
    Add to Wish List
  4. New

    Product SKU:
    21243

    Tank Emblem / Logo / Lettering / Decal for XT500 black/white, 1 pair
    Usage:
    XT500'78 USA
    €14.50
    Incl. 19% VAT,excl. Shipping Cost
    Add to Wish List
  5. New

    Product SKU:
    33047-1

    Jet Needle Shim 10x5mm, thickness 0.50mm stainless steel, for fine adjustment of the jet needle position (approx. 1/2 tuning step)
    Usage:
    Misc. Mikuni/Teikei carburettors e.g. BDSR38, BDST38
    €0.65
    Incl. 19% VAT,excl. Shipping Cost
    Add to Wish List
  6. New

    Product SKU:
    33047-2

    Jet Needle Shim 6x3mm, thickness 0.50mm stainless steel, for fine adjustment of the jet needle position (approx. 1/2 tuning step)
    Usage:
    Misc. Mikuni/Teikei carburettors, e.g. TM/VM-Vergaser
    €0.75
    Incl. 19% VAT,excl. Shipping Cost
    Add to Wish List
  7. New

    Product SKU:
    21023

    Rubber Sleeve for Sliding Pin Item 21022
    Usage:
    SR400FI'14-
    €12.70
    Incl. 19% VAT,excl. Shipping Cost
    Add to Wish List
  8. New

    Product SKU:
    41911

    Brembo Replica Rear Brake Disc, cast stainless steel, 4mm thick, rigid (Vehicle Type Approval for 3TB 90-95, 3AJ 88-90 & XTZ660)
    Usage:
    XT600'87-, XT600Z'87-, XT600K'90-, XT600E-'99, XTZ660
    €84.50
    Incl. 19% VAT,excl. Shipping Cost
    Add to Wish List
  9. New

    Product SKU:
    41912

    Brembo Oro Brake Disc, front left, cast stainless steel, 5mm thick, rigid (Vehicle Type Approval for 3TB 90-95)
    Usage:
    XT600/Z-'90, XT600E-'94, XT600K'90-
    €98.00
    Incl. 19% VAT,excl. Shipping Cost
    Add to Wish List
  10. New

    Product SKU:
    27007RP

    Oil Drain Plug Frame (front) or Separate Oil Tank, M8 hexagon with flange, galvanised
    Usage:
    SR500, TT500, XT500, XT600
    €0.95
    Incl. 19% VAT,excl. Shipping Cost
    Add to Wish List
  11. New

    Product SKU:
    91704

    14Z Ritzel, doppelseitig gummiert zur Geräuschreduktion
    Usage:
    TT500, XT500 or SR500 with 520 type chain
    €7.90
    Incl. 19% VAT,excl. Shipping Cost
    Add to Wish List
  12. New

    Product SKU:
    31155

    Off Road/Enduro Rubber Grip, right/short (OEM), closed, length 120 mm, for LH see item 31154, suitable for sleeve 31156 resp. universal
    Usage:
    Enduro universal and Ténéré700 (XTZ690) + WorldRaid + Explore-/Extreme-Edition
    €22.90
    Incl. 19% VAT,excl. Shipping Cost
    Add to Wish List
  13. New

    Product SKU:
    21039

    Schwingenachsbolzen (OEM), passende Mutter siehe Art. 27207
    Usage:
    XT250
    €79.50
    Incl. 19% VAT,excl. Shipping Cost
    Add to Wish List
  14. New

    Product SKU:
    10323

    Wiring Loom Retaining Clip, fixed wiring loom on alternator stator
    Usage:
    XT250
    €4.95
    Incl. 19% VAT,excl. Shipping Cost
    Add to Wish List
  15. New

    Product SKU:
    29461

    Feder Kettenspanner
    Usage:
    XT250
    €15.48
    Incl. 19% VAT,excl. Shipping Cost
    Add to Wish List
  16. New

    Product SKU:
    31154

    Off Road/Enduro Rubber Grip, left/short version (OEM), closed, length 120 mm, right see item 31155, suitable for throttle item no. 31156
    Usage:
    Enduro universal and Ténéré700 (XTZ690) + WorldRaid + Explore-/Extreme-Edition
    €22.90
    Incl. 19% VAT,excl. Shipping Cost
    Add to Wish List
  17. New

    Product SKU:
    10324

    Allen Screw with Flange M6x30 (OEM)
    Usage:
    MT-07, XSR700, MT-09, XSR900, Ténéré700 (XTZ690) + WorldRaid + Explore-/Extreme-Edition
    €2.75
    Incl. 19% VAT,excl. Shipping Cost
    Add to Wish List
  18. New

    Product SKU:
    31127LH

    Akrapovic Footpeg, left, titanium, standard with Extreme Edition, width like WorldRaid, mounting material + spring are taken over
    Usage:
    Ténéré700 (XTZ690) + WorldRaid + Explore-/Extreme-Edition
    €75.50
    Add to Wish List
    Out of stock
  19. New

    Product SKU:
    31157

    Short- Stroke Throttle Grip, opening angle 62°, suitable for original throttle cables and rubber grip, simple installation
    Usage:
    Ténéré700 (XTZ690) + WorldRaid + Explore-/Extreme-Edition
    €13.50
    Incl. 19% VAT,excl. Shipping Cost
    Add to Wish List
  20. New

    Product SKU:
    31136

    Rally Sprocket Cover (GYTR), powder-coated aluminum, black, fastening with 3x screw M6x30mm
    Usage:
    Ténéré700 (XTZ690) + WorldRaid + Explore-/Extreme-Edition
    €66.50
    Incl. 19% VAT,excl. Shipping Cost
    Add to Wish List
  21. New

    Product SKU:
    31127RH

    Akrapovic Footpeg, right, titanium, standard with Extreme Edition, width like WorldRaid, mounting material + spring are taken over
    Usage:
    Ténéré700 (XTZ690) + WorldRaid + Explore-/Extreme-Edition
    €75.50
    Add to Wish List
    Out of stock
Filter
Set Descending Direction

636 items

Page
per page