Race Parts

Here you can find parts for your racers

For the desert rally, the flat track or street circuit, the hill climb, the vintage moto cross. The KEDO team has a lot of experience and always likes to test new products in hard use. Our workshop also offers everything needed in the quest for adventure, performance and hundredths. Feel free to check out our .

New

Product SKU:
33144-2
KEDO TM36 Fine Tuning Kit without Throttle Grip Inner Part (WITHOUT carburettor), for unmachined cylinder heads WITHOUT FlowBench
Usage:
TT500, XT500, Mit Leistungsmessung in der Regel per Einzelabnahme bis Bj.88 eintragbar. Bitte vorher mit dem Prüfer abklären.

€54.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
New

Product SKU:
30968
Tuning Valve Spring Retainer Set, 20% weight saving, 2 pieces valve spring retainer with 4 valve keys, suitable for the original valve springs
Usage:
SR500, TT500, XT500

€59.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
New

Product SKU:
61056
Throttle Cable Support for max. Power, allows the throttle slide to open 100%, without road approval, only for sports use (e.g. flat track)
Usage:
SR400FI'14-

€9.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50326
KEDO Performance Intake Valve (+2mm), adaptation of valve seat and intake duct required
Usage:
XT250 (3Y3)

€29.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
KTH-10059BL
Aluminium Yoke 'Racer' Black Anodised, integrated mounting for speedometer bracket, delivery incl. manufacturer's certificate for individual approval
Usage:
SR400, SR500/T all

€125.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
KTH-10059SI
Aluminium Yoke 'Racer' Silver Anodised, integrated mounting for speedometer bracket, delivery incl. manufacturer's certificate for individual approval
Usage:
SR400, SR500/T all

€175.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30137B
KEDO Fork Stabiliser 'Full Black', easy mounting without fork removal, with manufacturer's certificate, fits with original front fender
Usage:
SR400FI, SR500

€89.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50682KT
KEDO Mounting Set for Oil Cooler Type 'SLIM' (item 50180/50180JG additionally required), includes bracket and small parts incl. oil lines
Usage:
TT500, XT500

€64.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50605KT
KEDO Mounting Set for Oil Cooler Type 'SLIM' (item 50180/50180JG additionally required), includes bracket and small parts incl. oil lines
Usage:
SR500/T (not suitable for SR400FI)

€59.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50180JG
Jagg Oil Cooler 6 Row, black, size approx. 200x54x33mm, connections for oil pipe item 90091/90144 (10mm), M6 fixings with distance 90mm

€219.00
Notify me

Add to Wish List

Out of stock
Product SKU:
91517
K&N Racing Air Filter RC-0981, oval chrome cap, flange diameter 54mm, fits item KTH-10049
Usage:
Universal, SR500 mit Art. KTH-10049

€69.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
91514
K&N Pre-Filter, for extra protection in extreme conditions (dusty terrain, flat track), for e.g. item 91555, dry / requires K&N oil item 91500
Usage:
suitable for round K&N racing filters with diameter 89, 102mm, length up to 152mm

€33.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
22113
Donut / Blade Ring for Throttle, sliding ring between throttle rubber and handlebar switch, smooth side inwards! outside d=59mm inside d=28.2mm, PTFE
Usage:
SR500, universal

€4.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
KTH-10049
Air Filter Mounting/Air Intake Tract- Extension for Racing Air Filter (54mm, e.g. item 91372), stainless steel, with black engine ventilation hose
Usage:
SR500-'89

€98.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30137
KEDO Fork Stabiliser, stainless steel bridge, black powder-coated clamps, easy installation, with manufacturer's certificate
Usage:
SR400FI, SR500

€89.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30991-3
LSL Aluminium Footrest System/ Backward Controls, complete set with rubberized round footrest bodies, offset 4cm/top+12cm/rear
Usage:
SR400FI, SR500

€379.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30991-2
LSL Aluminium Footrest System/ Backward Controls, complete set with tapered footrest bodies, offset 4cm/top+12cm/rear
Usage:
SR400FI, SR500

€379.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
91399
Lambda Probe Welding Socket incl. Sealing Plug, M12

€18.50
Notify me

Add to Wish List

Out of stock
Product SKU:
61012
Engine Mounting Set 'Racing', deep-drawn aluminium, can be polished, anodized or coated, 3 pcs. for front and rear
Usage:
SR500

€54.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
KTH-10057
Electronic System 'Evolution', alu black coated, electrical mounting plate for free frame triangle, mounting holes for standard- or Motogadget components
Usage:
Yamaha SR500

€29.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
KTH-10052
Decompression Lever 'Pur', ergonomic shape for easy handling, stainless steel
Usage:
Yamaha:SR400, SR500, TT500, XT500

€66.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
KTH-10061
Front Fork Stabilizer, stainless steel, high-strength construction against fork torsion, aesthetic design, without manufacturer's certificate
Usage:
YAMAHA:SR400, SR500, XS650

€59.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
22826
YSS Adjustable Front Fork Plugs, steplessly adjustable spring preload (max. 15mm adjustment range), aluminium silver anodized, 1 pair
Usage:
SR400FI'14-, SR500

€98.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
-13%

Product SKU:
50800-10
Working Glove »Kiel« for workshop and assembly work, flexible material, coated on one side, excellent tactile sensitivity
Usage:
Size 10

was €2.60 Special Price €2.25

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List