Search results for: '60 1 26'

Product SKU:
41974
Actuating Pin for Brake Light Switch Item 28792RP, located in the brake master cylinder casing (often lost when brake lever / switch is removed)
Usage:
TT600S/E, diverse Brembo-Bremspumpen

€4.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40701
KEDO Top Yoke Bushings (Massive) for Handlebar Clamp, Black Plastic, Set of 4
Usage:
XT550, XT600/Z/E+K, XTZ660, XTZ750, TDM850-'95

€31.69

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41764LED
Tachometer Replica Wiring Loom without Bulbs (bulbs see item 40052 and 40058), for LED indicators if all indicators are flashing at the same time
Usage:
XT500, SR500'81-'92 (LED flasher relay required for correct flashing frequency, see e.g. item 41151)

€26.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41356
DIY set LED headlights with daytime running lights on original electrics, for switching between low beam/daytime light, separate switch is required
Usage:
No modification of the original wiring harness except supply line to the parking light, handlebar switch see item no. Art. 40514, 40527, 40747

€42.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60407G
Spare Start Number Plate 'Six Days', Preston Petty plastic yellow, with cut-out for 5.75' headlights
Usage:
Universal for 5 3/4' headlights, recommended size of start number approx. 80mm (three digits) up to max. 120mm (one or two digits)

€24.95

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60407W
Spare Start Number Plate 'Six Days', Preston Petty plastic white, with cut-out for 5.75' headlights
Usage:
Universal for 5 3/4' headlights, recommended size of start number approx. 80mm (three digits) up to max. 120mm (one or two digits)

€24.95

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60625
KEDO Crankcase Separation Tool
Usage:
SR500, TT500, XT500, XT550, TT600, XT600

€42.29

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60349-3
LED Headlight Insert, complete, for OEM lamp housing, original lamp ring is taken over, e-approved, setting options as original
Usage:
XSR700-'21

€369.94

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
63041
Mini License Plate Bracket 'Tidy Tail', license plate angle adjustable, short sporty rear end incl. LED license plate light
Usage:
Honda CB650R/CBR650R 2021 and later

€89.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50791-PB
Front Fender Extension Profound Blu, with original mounting holes, suitable for fender item 50783-XX, rivet set see item 50792
Usage:
XT600Z

€47.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
90119
Silencer Insert/ db-Killer for OEM Exhaust incl. Stainless Steel Screws, street legal noise level
Usage:
TT600-'92, XT600-'86, XT600Z-'87

Notify me

Add to Wish List

Out of stock
Product SKU:
91173
Gasket Header Pipe/Exhaust 46.7x42x25mm, size similar to the original
Usage:
Ténéré700 (XTZ690) 2019 and later

€7.95

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
93605
Silencer Bracket 'MegPhone' incl. Mounting Material
Usage:
SR500 with 'MegPhone'-Silencer Item 93602

€17.49

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
KTH-10117
Ignition lock bracket, installation of the ignition lock under the fuel tank, stainless steel, no modification of the wiring loom necessary
Usage:
Yamaha:XS650 SE (3L1)

€16.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40265
'HYMEC YAMAHA' Hydraulic Clutch
Usage:
XT550, SRX600, TT600, XT600-'89 (ready-to-mount, no HYMEC Standard-Kit)

€391.14

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
22685
Throttle Grip Sleeve for Mikuni TM36/TM40 Carburettor, suitable for the original throttle grip housing
Usage:
SR500, SRX600

€19.61

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
27526
Transverse Baffle for Side Stand Spring
Usage:
XT250'83-85, XT600Z-'85 (34L, 50T, 55W), XT600-'86 (43F)

€7.95

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
-5%

Product SKU:
27140-4
Rear Sprocket Cush Drive Rubber, Set of 4, Complete
Usage:
XT550, TT600E/RE, XT600/Z/E+K, MT03, XT660X/R/Z, XTZ660

was €33.40 Special Price €31.73

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
91628
KEDO Oil Filter Kit, 7 Pieces, complete
Usage:
SR250, XT250, SR400, SR500, TT500, XT500, XT550, SRX600, TT600/S/E/R/RE, XT600/Z/E/K, SZR660, XT660, XTZ660

€8.43

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
10260
TRW-LUCAS Brake Pads, Sintered, Front, Fits Left or Right, (Vehicle Type Approval)
Usage:
MT-07/A/MOTO CAGE, XSR700/900, MT-09/A/SPORT TRACKER/STREET RALLY/TRACER, TDM900/A, XT1200Z, BT1100Bulldog'02-'06, FJR1300/A, FZ1N/NA/S/SA'-15

€27.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40851
KEDO Seat 'MT-Style', seat cover flat anthracite, not grained, seat length 55cm
Usage:
SR400'80-, SR500'80-

Notify me

Add to Wish List

Out of stock
Product SKU:
40801
KEDO Seat 'Sporty', black cover, length 55cm, incl. passenger seat strap, without rear mounting brackets
Usage:
SR400'80-, SR500'80-

Notify me

Add to Wish List

Out of stock
Product SKU:
41072
KEDO Comfort Seat 'GibbonSlap',cover with diamond pattern, length 55cm, take over rear mounting brackets from OEM seat
Usage:
SR400'80-, SR500'80-

Notify me

Add to Wish List

Out of stock
Product SKU:
22441
Single Seat Imola (GRP) with Mounting Kit (three mounting points, frame mount padded), without seat pad, incl. material expertise
Usage:
SR500/T (suitable seatpad see item no. 22048/22048P or foam rubber item no. 40346/40558)

€189.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List