Search results for: '60 17 1'

Product SKU:
30785
Replica Seat Cover, Black, Short Version, approx. 60cm (OEM Reference# 3H7-24731-00)
Usage:
XT500/S'80 (for Seat without Extension), for Seat Foam see Item 33131

€29.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
27047
Rubber Damper Side Cover Right Side (Square Shape) (OEM Reference# 43F-21773-00)
Usage:
TT600, XT600, XT600Z, XTZ660

€4.21

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30924
KEDO HD Cylinder Sleeve Nut, stainless steel, set of 2, OEM reference # 90179-10021, 90179-10201
Usage:
SRX600, TT600, XT600/Z

€23.85

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
28838
Sealing Rubber between Seat and Inner Mudguard (see item 28123), prevents dirt entering from rear wheel to the engine, replaces OEM 583-21746-00
Usage:
TT500'77-, XT500'77-

€6.95

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
22357
O-Ring (e.g. Valve Cover Caps/Timing Chain Tensioner Cap/Generator Plug), 1 Piece, OEM reference # 93210-32172
Usage:
SR500, TT500, XT500, XT600Z, XT600N, XTZ750, TDM850, TRX850, TDM900, XT1200Z

€1.65

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
94036
KEDO Carburettor Rebuild-Kit (Main Jet #165, Pilot Jet #17.5 = 21hp, incl. diaphragm for accelerator pump)
Usage:
XT250

€29.15

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
29309
Replica Side Cover, right, 'El Toro Orange' (without decal), OEM reference # 1T1-21721-00
Usage:
TT500'77 (suitable for all TT500-'78, XT500-'79 suitable for exhaust WITHOUT expansion chamber ONLY)

€54.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
22732
Ground Lead (L=160mm/Ring 8mm, Japan Type Plug)
Usage:
SR500, XT500

€3.45

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
DL43
Service Offer: Riveting Clutch Basket (without Spare Parts, please add Item No. 60360 or Item No. 60311)
Usage:
XTZ750, TDM850-'95

Notify me

Add to Wish List

Out of stock
Product SKU:
90058
Crankshaft Bearing, Right Hand, 1 Piece (suitable for XT600Z'86-, TT600S/E/R/RE, XT600E+K RH+LH)
Usage:
SR500, TT500, XT500, XT550, SRX600, TT600/S/E/R/RE, XT600/Z/K/E, SZR660, XTZ660

€26.45

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
22054
Needle Bearing / Bushing Swing Arm (inner bearing), 1 piece (2x needed), OEM reference # 93317-32231, dim. approx. 28mm x 22mm - W 20mm
Usage:
TT600-'92, TT600/E/S/R/RE, XT600E/K, XTZ660, XTZ750

€4.95

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
28407
Bearing for Clutch Lifter Arm (Engine), 1 Piece (OEM)
Usage:
SR500, TT500, XT500 (needed 2x top&bottom), XT550, SRX600, TT600/S/E/R/RE, XT600/Z/K, XT600E-'95 (needed 1x top)

€18.42

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
90057
Crankshaft Bearing, Left Hand, 1 Piece
Usage:
SR250, XT250, XT350, SR500, TT500, XT500, XT550, SRX600, XT600-'89, XT600Z-'85

€21.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
28696
Accelerator Pump Diaphragm (Pin Length 12,0mm, OEM reference # 2J4-14940-00
Usage:
SR500'80-'89, XT500G'80 US, XT500H'81 US

€16.43

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50544
KEDO PlugIn Regulator/Rectifier for 12V Conversion (easy to mount, requires no modification of wiring loom, replaces OEM regulator and rectifier)
Usage:
XT500-'85 (Please order 12V bulbs, battery, horn and flasher relay at the same time if needed. Not suitable in combination with Gel-Batteries)

Rating:
100%

1 Review

€69.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
29592
Nut for Top Yoke, incl. flange (this eliminates the need for the original washer), high-strength aluminum, spanner width 41mm
Usage:
TT600S/E/R/RE

€16.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30542
Aluminium Handlebar 'Tourer', silver, 760x170mm (Technical Component Report/Vehicle Type Approval)
Usage:
ABE: SR500 2J4/48T, MT03 RM02, TDM850 3VD/4CM/4TX, TDM900 RN08/RN11/RN18

€45.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30542S
Aluminium Handlebar Black, 760x170mm (Technical Component Report/Vehicle Type Approval)
Usage:
ABE: SR500 2J4/48T, MT03 RM02, TDM850 3VD/4CM/4TX, TDM900 RN08/RN11/RN18

€45.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50095
License Plate Strut, stainless steel, black, suitable for item 50089 Mini License Plate Bracket, incl. mounting material
Usage:
XT500 in combination with licence plate 50096 or 50097 (not 50182 or 50178)

€20.67

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
-15%

Product SKU:
92006
Service-Kit (2x Stainless Steel Banjo Screw, 9x Aluminium-Sealing Shim) for all KEDO Twin Feed Oil Kit
Usage:
suitable for Item No. 92001, 92050, 92101, 92102, 92105, 92108, 92110, 92117

was €15.32 Special Price €13.02

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40223
Replica Handlebar Switch, LH (Lights HI/LO, Horn, Blinking Lights)
Usage:
US models: XT250, XT500, DT125, DT175, DT250, DT400

Notify me

Add to Wish List

Out of stock
Product SKU:
62036
Fenderless Tail, plastic-coated aluminium cover plate, recommended for conversion to swingarm license plate bracket item 62026
Usage:
MT-07 until 2017

€34.45

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
42030
Fuel Petcock Makeover Kit Stainless Steel (10 screws/washers + front panel, suitable for SR500 petcocks equipped with two diaphragms)
Usage:
SR500-'92, XS500-'78 linker Benzinhahn

€15.37

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
22053
Tool Box Cover (ABS black coloured through) with Wingscrew, OEM reference # 3Y1-28185-00
Usage:
XT250

€19.61

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List