Search results for: '61 1 25'

Product SKU:
40218
O-Ring for Lever (Damper-Ring for Reducing the Play between Lever and Perch, suitable for Item 33003, 10010, 33050, 29120, 11004, 33061)
Usage:
SR250, XT250, SR500, TT500, XT500

€1.59

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
28010RP
Stud Bolt Cylinder Head, made of high-performance steel, M10x1.25 to M8x1.25, length 52.5 mm, 2x required, OEM reference no. 90116-10378
Usage:
XT550, SRX600, TT600/S/E/R/RE, XT600/Z/E/K

€16.95

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
27541RP
Replica Handlebar Switch Left, (a change in the wiring harness is necessary) OEM ref. # 30X-83972-01
Usage:
XT350-'92, XT600-'90, XT600Z-'87 (34L, 50T, 55W, 1VJ), div. DT125/R/RE/LC

€45.05

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
31083
KEDO T7 Reflector Bracket Aluminium Black Coated, with e-approved reflector, completes item 31081/30396/60526, for license plate height 13-20cm
Usage:
XSR125 2021 and later, TT600S/E, Ténéré700 (XTZ690) 2019 and later

€19.61

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
29149
Gasket (O-Ring) for Drain Plug Carburettor Float Chamber (Phillips Head), OEM reference # 214-14147-00
Usage:
XT250, SR500'81-'83, XT500'81-

€4.60

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
28115-21
Bolt for Chain Tensioner, KEDO version with grease nipple, OEM reference # 90109-10483
Usage:
TT500'79-, XT250, XT500'80-, XT550

€23.85

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
31081
KEDO T7 License Plate Bracket 'Tidy Tail', adjustable licence plate angle, short sporty rear end, incl. e-approved license plate light, version 2025
Usage:
Ténéré700 (XTZ690) 2019 and later

€104.94

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
27175HD
Wing Nut for Brake Linkage, stainless steel, OEM reference # 90175-06013
Usage:
XT250, SR500, TT500, XT500

€6.25

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
-10%
New

Product SKU:
23218
Engine Guard / Skid Plate Mounting Kit, complete, 13 pcs., for correct mounting of the original engine guard 3Y1-21471-00-33
Usage:
XT250

was €16.40 Special Price €14.76

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
28144
Spring Cotter Pin, OEM Reference # 90486-12006
Usage:
e.g. SR/XT500 Handlebar Clamp

€1.01

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40106-18
Replica wiring loom KEDO PLUS, crimped internal connections, incl. matching connectors set (allows original connection on vehicle side if modified)
Usage:
XT250 (Typ 3Y0/3Y3/4Y0/4Y1/5G4)

€100.17

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41552-4
4-Way Connector/Housing-Set with Snap-In Nose incl. 2x4 Connectors Type 250

€5.04

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
27108
Ventilation Pipe, Black, Inner Diam. 4,5mm, Length 1m
Usage:
SR500, TT500, XT500

€7.37

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30217S
Ignition Inspection Cover, aluminium, black anodized, (Improved 2021 series with new deep black anodised coating)
Usage:
TT500, XT500

€17.49

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41552-2
2-Pin Connector/Housing-Set with Snap-In Nose incl. 2x2 Connectors Type 250

€5.04

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41552-6
6-Way Connector/Housing-Set with Snap-In Nose incl. 2x6 Connectors Type 250

€6.89

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
61025
Heidenau K60 Enduro Tyre 4.00-18' 64T TT Scout M+S, Load/Speed-Index: 280kg/180km/h
Usage:
XT250, SR500, TT500, XT500, XT600Z-'87, XT600-'89 / SR400'14- (Einzeleintragung erforderlich)

€116.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
29105RP
Fuel Tank Cap, with inner thread (suitable for aluminium tank with external thread), no seal required due to design, simplified venting
Usage:
XT250(3Y3), TT500'79-/XT500'80-, XT550

€14.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
-26%

Product SKU:
31115
Heat Protection Cover at Connecting Pipe, suitable for OEM Silencer, stainless steel, replaces the OEM protection by a sturdy Offroad version
Usage:
Ténéré700 (XTZ690) 2019 and later

was €26.50 Special Price €19.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
-10%

Product SKU:
22561
Rear Wheel Bearing Set (3 Pieces)-- TT600R/RE ONLY--all other TT see Item 22559
Usage:
TT600E'96-, TT600RE'03-

was €29.50 Special Price €26.55

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40851
KEDO Seat 'MT-Style', seat cover flat anthracite, not grained, seat length 55cm
Usage:
SR400'80-, SR500'80-

Notify me

Add to Wish List

Out of stock
Product SKU:
28361
Stud, M10x173mm, Cylinder, Rear Left & Front Right, 1 Piece
Usage:
SR500, TT500, XT500

€12.31

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
27761
Washer, domed, galvanised, for attaching taillight bracket to rear fender, 1 piece (2 required)
Usage:
XT500

€6.95

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
28611
Footpeg Rubber, 1 piece (OEM)
Usage:
TT600RE'04, XTZ660, XTZ750, DT125'93-'02, TW125'99-04

€33.47

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List