Search results for: '60 1 26'

Product SKU:
62037
Fenderless Rear Section, cover plate aluminium coated, recommended for conversion to swingarm license plate bracket item 62026
Usage:
XSR700

€40.81

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
63028
Bracket for License Plate Lighting, extended item no. 63025, suitable for 'E'-approved LED license plate lighting 41427 or 41406
Usage:
Extension for item 63025

€9.01

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
42030
Fuel Petcock Makeover Kit Stainless Steel (10 screws/washers + front panel, suitable for SR500 petcocks equipped with two diaphragms)
Usage:
SR500-'92, XS500-'78 linker Benzinhahn

€15.37

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
94036
KEDO Carburettor Rebuild-Kit (Main Jet #165, Pilot Jet #17.5 = 21hp, incl. diaphragm for accelerator pump)
Usage:
XT250

€29.15

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40724
Silencer Mounting Set, Stainless Steel (Allen Screw M10x1.25 40mm, Washer 10x29mm, Bushing and Rubber)
Usage:
SR500'84- (Suitable for OEM- and Solo-Bracket Item. 40662)

€19.61

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40233
KEDO Speedometer-Bracket-Set with center position for KOSO All-In-one Speedo 41306 (notincluded) stainless steel black coated, incl. mounting material
Usage:
SR500/T-'94

€23.85

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
22053
Tool Box Cover (ABS black coloured through) with Wingscrew, OEM reference # 3Y1-28185-00
Usage:
XT250

€19.61

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
29049RP
Replica handlebar switch LH, no parking light position, OEM-Comparison-No.4J3-83972-00, suitable for wiring harness 40106-18
Usage:
XT250 (3Y3) with 4 pin female housing and 4 pin male housing (round type connectors)

€69.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40955
Header Pipe Heat Protection, stainless steel 1.5mm, suitable for original and KEDO header pipes, optically similar to original
Usage:
TT500, XT500

€18.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
New

Product SKU:
29544ST
Replica End Cap (steel, raw) for welding repairs to OEM silencer end caps, internal connection diameter 77.5 mm, OEM reference # 1T1-14752-01-00
Usage:
TT500, XT500

€59.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
27420
Kickstarter Small Part Set (spring, ball, OEM bolt, 2x clip, 10 washers (6x 0.1, 2x 0.5, 2x 1mm))
Usage:
SR500, TT500, XT500 (Quick fix for attrited Kickstarters)

€11.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
27838RP
Floater (Carburettor), for MIKUNI VM32, OEM reference # 583-14185-00
Usage:
TT500, XT500

€34.45

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
28500
Special Sealing Ring Carburettor Shaft (Activation Throttle Slide) --> Alternative see item 94008/94009, OEM reference # 583-14239-01
Usage:
SR500-'89 (VM34SS Round Slide Carburettor), TT500 (VM34), XT500 (VM32)

€3.46

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
28576
Replica Rear Wheel 1.85x18', OEM Hub, Black incl. Bearings, Replica Rim Gold, Stainless Steel Spokes (Brand New Parts, NO Rebuild)
Usage:
XT500-'87

Notify me

Add to Wish List

Out of stock
Product SKU:
28920
Replica Rear Wheel 1.85x18', OEM hub black incl. bearings, replica rim silver, stainless steel spokes (new parts, no rebuild)
Usage:
XT500

€719.74

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
28932
Mounting Set for Air Filter Box Item 28621 (mounting brackets outside / inside, rubber dampers, screws, etc.)
Usage:
TT500, XT500

€42.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
29309
Replica Side Cover, right, 'El Toro Orange' (without decal), OEM reference # 1T1-21721-00
Usage:
TT500'77 (suitable for all TT500-'78, XT500-'79 suitable for exhaust WITHOUT expansion chamber ONLY)

€54.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
29434
Mounting Kit for OEM XT500 Chain Guard Item 10149RP, 20 Pieces, Complete (Rubbers, Bushings, Screws, Washers)
Usage:
XT500'77-

€19.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
22036
Ground Distributor Japan Plug to 4x Japan Socket, 0.75qmm, lenght approx. 14cm, black (universal, e.g. for central ground point taillight/indicator)

€4.19

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50052
Replica Front Fender 'Clean White' (with Standard Mounting Holes)(OEM Reference# 583-21511-00)
Usage:
TT500'76, XT500-'79 (suitable for all TT500-'78, XT500-'79)

€47.70

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50053RP
Strut for License Plate, stainless steel black powder coated, suitable for item 50088 resp. OEM support, OEM reference # 1U6-21682-00
Usage:
XT250, XT500

€20.67

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50502
H4/Flasher Relay Connection Kit (2x 3-Port Socket, Bullet Connector Set (52 Pcs), 100x Cable Ties 100mm & Terminal Tags (4x 6mm, 2x 5mm)

€13.25

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50695
Generator Wiring Loom incl. Small Parts (for being soldered to both coils on the stator), OEM reference # 2H0-81315-50
Usage:
XT500

€25.97

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50725
Replica Front Fender 'Crystal Silver' (with standard mounting holes), OEM reference # 2H0-21511-00-20
Usage:
XT500 USA/Australien (suitable for all TT500-'78, XT500-'79)

€136.74

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List