Search results for: '120'

XT 250 Selection Our Catalog. 674 pages. DOWNLOAD or ONLINE ...

Inspection of the SR500 ignition The first thing to do is to check the individual components: Wiring harness, kill switch, ignition lock, alternator, ignition plug, ignition coil, ignition cable. Often overlooked is the inspection of the kill switch. This sometimes generates a leakage current (permanent or short-term) and thus destroys the alternator. Checking is often not possible with a commercial multi-tester. Check the spark at the spark plug. Then disconnect the kill switch and check again. ...

Rally Cockpit Plate for Garmin Zumo XT/XT2, GPS, upright mounting, speedometer offset right, requires Cockpit Stabilizer item 31113-25 Ténéré700 (XTZ690) 2025 and later This PDF is available in: German, English. Download instructions as PDF

Number Plate 'Six Days', Preston Petty plastic yellow, ready to mount with black stainless steel brackets, for original headlight brackets, tilt +/-. XT500'80-, recommended size of start number approx. 80mm (three digits) to max. 120mm (one or two digits) Please note: this PDF is only available in German. Download instructions as PDF

Number Plate 'Six Days', Preston Petty plastic white, ready to mount with black stainless steel brackets, for original headlight brackets, tilt +/-. XT500'80-, recommended size of start number approx. 80mm (three digits) to max. 120mm (one or two digits) Please note: this PDF is only available in German. Download instructions as PDF

Number Plate 'Six Days', Preston Petty plastic yellow, ready to mount with black stainless steel brackets, for original headlight brackets, tilt +/-. XT500-'79, recommended size of start number approx. 80mm (three digits) to max. 120mm (one or two digits) Please note: this PDF is only available in German. Download instructions as PDF

Number Plate 'Six Days', Preston Petty plastic white, ready to mount with black stainless steel brackets, for original headlight brackets, tilt +/-. XT500-'79, recommended size of start number approx. 80mm (three digits) to max. 120mm (one or two digits) Please note: this PDF is only available in German. Download instructions as PDF

Rear Wiring Loom "Customizing", approx. 1m, for connecting taillight, indicator & number licence plate light on the original wiring loom, 8-way socket Triumph Scrambler 1200 2001- This PDF is available in: German, English. Download instructions as PDF

JvB-moto Rear Fender, unpainted GRP, incl. mounting material + instruction, incl. LED tail light 41297B, licence plate bracket 63102 recommended Triumph Scrambler 1200 2021- This PDF is available in: German, English. Download instructions as PDF

JvB-moto Front Fender (ABS unpainted), Scrambler style, aluminium bracket/fork protectors included Triumph Scrambler 1200 2021- This PDF is available in: German, English. Download instructions as PDF

Decal 'Diapason', Silver, detached, 1 Pair approx. 50mm This PDF is available in: English. Download instructions as PDF

Decal 'Diapason', Silver, inverted, 1 Pair approx. 50mm This PDF is available in: English. Download instructions as PDF

Sticker Side Cover Lettering "600", red/black, white background, 1 piece for left or right fitting, 2x needed, OEM reference # 43F-21781-20 XT600-'86 43F/1986 (base colour: white) This PDF is available in: English. Download instructions as PDF

Fuel Tank Decal Red/Silver/Dark Grey, 1 Pair (Replica) XT250'83- This PDF is available in: English. Download instructions as PDF

Fuel Tank Decal Yellow/Silver/Dark Grey, 1 pair (color variant for item 92120 without historical model) XT250 This PDF is available in: English. Download instructions as PDF