JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

Home
Search results for: '60 1 260'

Search results for: '60 1 260'

Did you mean: 60 1 20; 60 1 250

Product SKU:
27216RP
End Cap for Silencer (for US-version, spare part for silencer #28046RP), OEM reference # 1E6-14752-00
Usage:
XT500'76 (USA)

€34.45

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
22060
Speedometer Bracket/Guide, Stainless Steel, Ready-To-Mount (In Addition to GibbonSlap Fender Item WM0013)
Usage:
SR400, SR500/T (if necessary also leads the brake line, if brake left)

€36.57

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
22416
Rear Fender 'Roadster', GRP, approx. 17cm shorter than OEM, mounting kit for fender and license plate see item 62017, for fender only see item 62018
Usage:
SR500

€145.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
New

Product SKU:
26607
Replacement Gasket for Reinforcement Plate Connection, air filter housing, item no. 22361
Usage:
TT500, XT500

€3.95

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
29314
Replica Side Cover, left, 'El Toro Orange' (without decal), OEM reference # 1G1-21711-00
Usage:
TT500'77 (suitable for all TT500-'78, XT500-'79)

€51.83

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
28551KD
Exhaust Support for Original Exhaust, vibration decoupled mounting, replaces OEM 1T1-14791-00, incl. mounting material + instructions, complete
Usage:
TT500'77-, XT500'77-

€28.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
28711
Replacement Rubber / Splash Guard for Inner Fender 28123, optionally rivet or screw fastening, HeavyDuty Version 3mm/max. 250°C
Usage:
TT500, XT500

€18.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
31311
Flywheel tool for Powerdynamo item 31348 and 31349, stainless steel, rubberized handle

€14.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40105
KEDO Circlip Set 7-30mm, 10 Sizes/ 2 Shapes, 5 Pieces each
Usage:
misc. Yamaha Models

€15.37

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40121
KEDO Cotter Pin Set, zinc-plated (16 Pieces)

€3.71

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40591
TT500 Lighting Kit, without HS1 bulb, incl. e-approved reflector and lamp grille -> please enlarge hole for pilot light if necessary
Usage:
TT500 (ohne Leuchtmittel, bitte ggf. Art. 40022 mitbestellen)

Notify me

Add to Wish List

Out of stock
Product SKU:
40621
KEDO Classic-Speedometer Bracket for OEM Instrument, aluminium, incl. mounting material. Reloaction of main switch necessary, see item 41289/41210-01
Usage:
SR500/T-'94

€13.25

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40916
Safety Wire Special Washers/Tabs, 18 pieces 6x each for M6-, M8- and M10- hexagonal heads, hole for safety wire

€14.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
31187
Rallye-Cockpit Plate, speedo offset to the left, universal mounting option for smartphone, GPS, etc. (requires stabiliser item no. 31113-WR)
Usage:
Ténéré700 + Explore-/Extreme-Edition (XTZ690) 2023-2024, WorldRaid (XTZ690) 2022-2024

€54.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
31209
Rally Cockpit Plate for Garmin Zumo XT/XT2, GPS, upright mounting, speedometer offset right, requires Cockpit Stabilizer item 31113-25
Usage:
Ténéré700 (XTZ690) 2025 and later

€67.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
20116
HD-Flywheel Holder, uses swingarm nut as support point (requires 22mm nut with max. outer diameter 32mm - please order item 20115 if needed)
Usage:
SR500'95-

€28.09

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
10310
KEDO HeavyDuty Side Stand, for 12mm frame hole and 2 parallel springs, with stop limiter, black plastic coated
Usage:
XT500/S'80- (German frame with mounting for two side stand springs)

€58.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
10318
Side Stand Widening, safer stand on loose ground, 158% more contact surface, +6mm extension, fits all KEDO HeavyDuty side stands
Usage:
XT500 (not suitable for the original side stand!)

€24.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
21329
Tank Decal Design Model 1979, 'Competition Yellow', complete left/right, can be painted over
Usage:
XT500'80- with fender Competition Yellow item 50782

€49.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41423
Float Valve incl. Seat for TM Carburettor, size 3,3, standard in TM36, needs O-ring 29154)
Usage:
Mikuni TM36 (STD), TM40

€10.07

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41525-3
3-Pin Connector Housing with Snap-In Nose incl. 2x3 Connectors Type 110

€5.25

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41525-4
4-Pin Connector Housing with Snap-In Nose incl. 2x4 Connectors Type 110 (Alternative see Item 28526)

€5.25

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41116
Replica Headlight (Non-German Models) incl. H4 Insert and Lens Protector (Bulbs see 40002/40003/40022), Mounting Sizes approx. 165/55mm
Usage:
XT500 (suitable for misc., e.g. SR500

€104.94

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41311-2
KEDO Speedometer Bracket 'Pure',stainless steel, powder-coated, for vibration-decoupled mounting of misc. 60mm speedos, e.g. Daytona
Usage:
XT500

€34.45

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List