Workshop

JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

Home
Workshop

New

Product SKU:
31364
Combination Wrench Tool with 1/2-inch Ratchet Wrench Drive, stainless steel, for loosening/mounting the steering head sleeve nut, item 29590
Usage:
TT600S/E/R/RE

€9.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
31362
Combination Wrench Tool AF 42m with 1/2-inch Ratchet Wrench Drive, stainless steel, for loosening/mounting item 29592 or the original yoke nut
Usage:
TT600S/E/R/RE

€7.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60598
HSS Drill Bit 13.0mm, with reduced shaft to 8mm (suitable for cordless screwdrivers), point angle 118°degree, roll-rolled

€2.99

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60288
Chain Riveting Tool AFAM Easy RIV 5, suitable for riveting 520,525 and 530 hollow rivet chain joints
Usage:
universal

€22.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60720
Tool Set 3 Pcs. for the Installation of the KEDO Oversize Foot Brake Bolt Item 10122RP, incl. tap wrench, 17.5mm HSS drill with 10mm shaft, HSS reamer 18.0mm
Usage:
XT500

€59.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40309
Test Lamp for Ignition Cable, detects ignition spark between ignition coil and spark plug connector, works already when kicking
Usage:
Universal for Motorcycles/Vehicles, but not for contact ignitions (e.g. original XT500)

€26.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
20116
HD-Flywheel Holder, uses swingarm nut as support point (requires 22mm nut with max. outer diameter 32mm - please order item 20115 if needed)
Usage:
SR500'95-

€26.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
710003HD
HeavyDuty Shock Absorber Press, Made by KEDO, stainless steel (Not for shock absorbers with fixed reservoir or mono shock absorbers)

€57.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30285
Slide Hammer for Gear Puller, 1500g, 400mm rod, thread M12x2

€34.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60698
HSS Drill 12.0mm with Reduced Shank to 10mm (suitable for cordless screwdrivers), point angle 118°degrees
Usage:
TT500-'78, XT500-'79 (Umbau auf Seitenständer-Variante ab 1980)

€3.95

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30284
Gear Puller, suitable for inner diameter 19-20mm (ball- /needle bearings), requires slide hammer item 30285
Usage:
e.g. TT500/SR500/XT500 needle bearing/swingarm

€31.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41704
A/F17mm Allen Wrench Socket, 1/2' Drive
Usage:
e.g. Fork Leg Plug SR500

€13.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
20114
HD-Flywheel Holder, uses swingarm nut as support point (requires 22mm nut with max. outer diameter 32mm - please order item 20115 if needed)
Usage:
SR500 until 1994, TT500, XT500

€26.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
31311
Flywheel tool for Powerdynamo item 31348 and 31349, stainless steel, rubberized handle

€14.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
61124
Removal Tool for Speedometer Drive, 3/8' Drive (for Service and Repair Purpose)
Usage:
XT500, SR500T

€16.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60058
(Electric) Contact Unlocking Tool (1 Set)
Usage:
To Unlock Electric Contacts in Multi Connectors

€22.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40120
Socket with Slot (damper piston counterholder for disassembly/assembly of inner & outer tube), drive 1/2', required drive length approx. 38cm
Usage:
TT500-'78, XT500-'79 and misc. older YAMAHA

€17.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40111
Crankshaft Mounting Tool, for pulling the crankshaft into the generator crankcase half
Usage:
SR500, TT500, XT500

€75.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
61062
Inspection Cover (-Plug) Tool, Tri-Wrench, 16/22/38mm

€31.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60625
KEDO Crankcase Separation Tool
Usage:
SR500, TT500, XT500, XT550, TT600, XT600

€39.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60626
Protective Sleeve for Crankshaft Thread (Bronze), suitable for Ø up to 14 mm, fix with adhesive tape against slipping if necessary
Usage:
SR500, TT500, XT500, XT550, XT600, TT600

€4.95

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60235
KEDO Clutch Basket Holder/Jig
Usage:
SR250, XT250, XT350, SR500, TT500, XT500, XT550, TT600, SRX600, XT600, SZR660, XTZ660, XTZ750, TDM850, TRX850, TDM900

€27.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
-10%

Product SKU:
40305
Ignition Timing Tool, 6-24V, for Static Adjustment
Usage:
XT500

was €7.50 Special Price €6.75

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30270
KEDO Flywheel Puller (universal), max. suitable diameter 90mm
Usage:
XT550, TT600 alle, XT600 alle, SRX600, SZR660, XTZ660

€59.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List