Race Parts

Here you can find parts for your racers

For the desert rally, the flat track or street circuit, the hill climb, the vintage moto cross. The KEDO team has a lot of experience and always likes to test new products in hard use. Our workshop also offers everything needed in the quest for adventure, performance and hundredths. Feel free to check out our .

Product SKU:
91165
SR500 'Racing Chain Kit', complete with 16T Front Sprocket, 42T Alu Rear Sprocket, DID Racing Chain 520ERT3/102 Links + Clip Joint and Small Parts
Usage:
SR500 (Chain is open, comes with Clip Joint)

€142.73

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40755
Stainless Steel Adapter (Unpainted) for 2-Piston Brake Caliper (e.g. XT600E Brake Caliper, Mounting Holes 70mm), incl. Bolts & Manufacturer's Declaration
Usage:
SR500

€59.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60107
Engine Transportation & Workstand (incl. Bolts)
Usage:
SR400, SR500, TT500, XT500

€19.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40632
Intake Duct for Mikuni TM36/40, Length 120mm, Complete with K&N Racing Air Filter and Mounting Material
Usage:
SR400, SR500, XT500

€115.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41782
Electronic System 'Basic', aluminum black, electrical mounting plate for free frame triangle, for mounting the original CDI/controller, incl. edge trim
Usage:
SR500

€22.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30039
KEDO Footpeg Mount Bushings, Complete Set, Massive Aluminium, Replacement for Rubber Bushings #27114 and Bracket #27115 (Frame)
Usage:
SR400/SR500

€58.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50608
KEDO Oil Cooler Kit ready-to-mount, complete (replaces Item No. 50545)
Usage:
SR400, SR500/T

€229.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
22441
Single Seat Imola (GRP) with Mounting Kit (three mounting points, frame mount padded), without seat pad, incl. material expertise
Usage:
SR500/T (suitable seatpad see item 22048/22048P or foam rubber40346/40558)

€189.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60640
Engine Mounting Stand, stainless steel incl. bolts (Illustration shows zinc plated version)
Usage:
XT550, SRX600, TT600/E/S/R/RE, XT600/Z/E/K

€87.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
33142
KEDO TM36 Rejetting- & Mounting-Kit (WITHOUT Carburettor)
Usage:
SR500-'89, Mit Leistungsmessung in der Regel per Einzelabnahme bis Bj.88 eintragbar. Bitte vorher mit dem Prüfer abklären.

€62.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
33144
KEDO TM36 Fine Tuning-Kit without Throttle Grip Sleeve (WITHOUT Carburettor), suitable for FlowBench machined cylinder heads
Usage:
TT500, XT500, Mit Leistungsmessung in der Regel per Einzelabnahme bis Bj.88 eintragbar. Bitte vorher mit dem Prüfer abklären.

€47.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
33143
KEDO TM36 Rejetting- & Mounting-Kit incl. connection rubber carburettor-airbox (WITHOUT Carburettor)
Usage:
SR500'90-

€79.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30976
KEDO Racing Valve Springs (Steel- Tops)
Usage:
SR500, TT500, XT500

€155.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40916
Safety Wire Special Washers/Tabs, 18 pieces 6x each for M6-, M8- and M10- hexagonal heads, hole for safety wire

€12.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40720
KEDO Aluminium Chain Guide (Case Saver), black powder coated, incl. black anodized aluminium bolts
Usage:
SR500, TT500, XT500 Front Sprocket up to 16T max.

€14.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50076
KEDO Performance Intake Valve (+2mm), nitrated
Usage:
SR500, TT500, XT500'80-

€69.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60293
Engine Mounting Stand, Stainless Steel, incl. Bolts
Usage:
SR400, SR500, TT500, XT500

€69.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40537
Aluminium Dummy Plug Set for Tachometer-/Speedometer Cable incl. O-Ring
Usage:
Tachometer Drive: SR400, SR500, TT500, XT500 | Speedometer Drive: XT500, SR500T (with Front Drum Brake)

€8.95

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30221
Carburettor Heat Protection Set, aluminium black coated
Usage:
SR500, TT500, XT500

€9.95

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30087KSP
Tuning camshaft 'Top End Power', in exchange for your exchangeable OEM camshaft, hard block rocker arm #90004 highly recommended
Usage:
SR500, XT500, TT500

€179.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List