Race Parts

Here you can find parts for your racers

For the desert rally, the flat track or street circuit, the hill climb, the vintage moto cross. The KEDO team has a lot of experience and always likes to test new products in hard use. Our workshop also offers everything needed in the quest for adventure, performance and hundredths. Feel free to check out our .

Product SKU:
90300
Exhaust Wrap, heatproof (750°C), length 10m, width 50mm, graphit-anthrazit
Usage:
Suitable for wrapping header pipes. Tip: Can be fixed perfectly with item 90339/90373

€29.90

Incl. 19% VAT,excl. Shipping Cost

€2.99 / 1 m

Add to Wish List
Product SKU:
40821
Daytona 'Velona' Tachometer, Diam. 60x45mm, Polished. Display: RPM, °C, °C max, RPM max, Stop Watch, White Displ. Lighting
Usage:
SR500, for Mounting Bracket please see Item 40822

Notify me

Add to Wish List

Out of stock
Product SKU:
40568
Lift Up Bike Stand, 305-395mm, max. 160kg Steady Load, Detatchable Handle, 3mm Rubber Layer
Usage:
universal

€47.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60682
Positioning Tool for Item 60681 (Welding Gauge, 2mm Stainless Steel), incl. Mounting Screws
Usage:
SR500, TT500, XT500

€9.80

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
91165
SR500 'Racing Chain Kit', complete with 16T Front Sprocket, 42T Alu Rear Sprocket, DID Racing Chain 520ERT3/102 Links + Clip Joint and Small Parts
Usage:
SR500 (Chain is open, comes with Clip Joint)

€152.23

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
11122C
Stainless Steel Brake Line, one-piece, length 151-250cm (length, colour of fittings & shroud freely selectable, incl. copper sealing rings)

€77.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40755
Stainless Steel Adapter (Unpainted) for 2-Piston Brake Caliper (e.g. XT600E Brake Caliper, Mounting Holes 70mm), incl. Bolts & Manufacturer's Declaration
Usage:
SR500

€59.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
60107
Engine Transportation & Workstand (incl. Bolts)
Usage:
SR400, SR500, TT500, XT500

€24.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
11133
Stainless Steel Brake Line, Two-Piece, (Length, Colour of Fittings & Shroud freely selectable)

€110.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
11122A
Stainless Steel Brake Line, One-Piece, Length up to 50cm (Length, Colour of Fittings & Shroud freely selectable, incl. copper sealing rings)

€54.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
91520
K&N Racing Air Filter (Length 127mm/Diameter 96mm), Flange 60-64mm
Usage:
Mikuni VM36 Round Slide Carburettor

€66.67

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
22424
Tommaselli Throttle, One-Cable, 46mm Stroke at 36mm/80° Rotation Angle incl. 1 Set uf Handlebar Grips

€46.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
32288
VM36-4 Round Slide Carburettor WITHOUT Mounting Parts, not street legal, main jet #310, pilot jet #35, Diameter for airbox 62mm
Usage:
SR500'84-

€159.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40632
Intake Duct for Mikuni TM36/40, Length 120mm, Complete with K&N Racing Air Filter and Mounting Material
Usage:
SR400, SR500, XT500

€115.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
DL38
Service Offer: Mounting of Stock Size Cylinder Sleeve, 1 Piece, incl. Planing

€129.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
92510
Silencer Packing, Heat Resistant (250g)
Usage:
Universell einsetzbar. Premiumqualität von SilentSport

€16.50

Incl. 19% VAT,excl. Shipping Cost

€66.00 / 1 kg

Add to Wish List
Product SKU:
11122B
Stainless Steel Brake Line, One-Piece, Length 51-150cm (Length, Colour of Fittings & Shroud freely selectable, incl. copper sealing rings)

€67.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30426NEU
Tuning camshaft 'RaceTrack', NO exchange camshaft required, hard block rocker arm item 90004 highly recommended
Usage:
SR500, XT500, TT500

€468.22

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41782
Electronic System 'Basic', aluminum black, electrical mounting plate for free frame triangle, for mounting the original CDI/controller, incl. edge trim
Usage:
SR500

€22.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30039
KEDO Footpeg Mount Bushings, Complete Set, Massive Aluminium, Replacement for Rubber Bushings #27114 and Bracket #27115 (Frame)
Usage:
SR400/SR500

€58.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
28884
Kill Switch, 75cm Wiring Loom, suitable for CDI-Ignitions (Size Top 20x22mm, Bottom 24x28mm)
Usage:
div. YAMAHA (TT500/XT500/600, YZ etc.) - fits SR500 with OEM CDI

€14.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41098
KEDO Digital Ignition Kit
Usage:
SR500-'94

€269.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50608
KEDO Oil Cooler Kit ready-to-mount, complete (replaces Item No. 50545)
Usage:
SR400, SR500/T

€229.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40501
KOSO Mini Style - Air/Fuel Ratio Meter (LCD lambda probe meter), Kit includes LCD Unit, Welding Nut (12mm Height), Cap, Lambda Probe M12, Wiring Loom
Usage:
universal

€176.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List