Race Parts

Here you can find parts for your racers

For the desert rally, the flat track or street circuit, the hill climb, the vintage moto cross. The KEDO team has a lot of experience and always likes to test new products in hard use. Our workshop also offers everything needed in the quest for adventure, performance and hundredths. Feel free to check out our .

New

Product SKU:
22238
1-Mann GFK Flattrack-Höckersitzbank 'Sturgis', ungebohrt, inkl. Materialgutachten, ohne Polster
Usage:
SR500

€189.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
New

Product SKU:
92088-2
Stainless Steel Racing Exhaust System complete incl. Header, intermediate pipe, rear silencer, mounting material (ready to fit, not street legal)
Usage:
SR500 - System with external header pipe routing

€669.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
New

Product SKU:
32216
Fine-tuning Kit for MikuniVM36 Carburetor, 3x main jet, 3x pilot jet (original Mikuni jets) + instructions
Usage:
SR500

€27.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
-31%
New

Product SKU:
41983
Flattrack-Felge 2.15x19' Excel, gelbgold eloxiert, Bohrmuster passend für SR500 vorn und SR/XT hinten, SONDERPOSTEN solange Vorrat reicht
Usage:
SR500

was €187.00 Special Price €129.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
New

Product SKU:
22045
Short-Stroke Throttle Grip Sleeve for Mikuni TM36/TM40 Carburettors, suitable for the original throttle grip housing
Usage:
TT500, XT500

€14.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
New

Product SKU:
41984
Flattrack Rim 2.15x19' Takasago Excel, Bore Pattern suitable for SR500 front and SR/XT rear
Usage:
SR500

As low as €165.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
New

Product SKU:
31207
Flattrack 19' Spoke Set Stainless Steel, front, WITHOUT spoke nipple (order spoke nipple according to hole in rim, see item 31204/31205/31206)
Usage:
SR500

€64.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
New

Product SKU:
31203
Flattrack 19' Spoke Set Stainless Steel, rear, WITHOUT spoke nipple (order spoke nipple after drilling diameter in rim order, see item no. 31204/31205/31206)
Usage:
SR400FI'14-, SR500, XT500, XT550, XT600/Z/E/K

€64.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
New

Product SKU:
31204
Spoke Nipple Set 36 Pieces, for rims with 6,4 mm hole, M4 thread, for our stainless steel spokes

€24.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
New

Product SKU:
91455
Exhaust Tension Spring, universal, stainless steel, 60mm, 15mm diameter, 2,5mm wire, silicone sheath heat-resistant

€9.25

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
New

Product SKU:
80185
Sticker Sheet DIN A4, Sticker Kit, Yamaha GYTR

€10.66

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
New

Product SKU:
42045
Plastic Screw with M6x20mm Flange, hexagonal A/F10 and Torx/T30 drive, for fastening the fork protectors in off-road use, material: nylon/PA
Usage:
Ténéré700 (XTZ690) + WorldRaid + Explore-/Extreme-Edition

€0.85

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41335
Kill Switch, cable length approx. 44cm, suitable for CDI ignition (shorts out, switch dim. above approx. 20x22mm)
Usage:
div. YAMAHA (TT500/XT500/600, YZ etc.) - fits SR500 with OEM CDI

€23.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
33144-2
KEDO TM36 Fine Tuning Kit without Throttle Grip Inner Part (WITHOUT carburettor), for unmachined cylinder heads WITHOUT FlowBench
Usage:
TT500, XT500, Mit Leistungsmessung in der Regel per Einzelabnahme bis Bj.88 eintragbar. Bitte vorher mit dem Prüfer abklären.

€54.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30968
Tuning Valve Spring Retainer Set, 20% weight saving, 2 pieces valve spring retainer with 4 valve keys, suitable for the original valve springs
Usage:
SR500, TT500, XT500

€64.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
61056
Throttle Cable Support for max. Power, allows the throttle slide to open 100%, without road approval, only for sports use (e.g. flat track)
Usage:
SR400FI'14-

€9.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50326
KEDO Performance Intake Valve (+2mm), adaptation of valve seat and intake duct required
Usage:
XT250 (3Y3)

€29.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
KTH-10059SI
Aluminium Yoke 'Racer' Silver Anodised, integrated mounting for speedometer bracket, delivery incl. manufacturer's certificate for individual approval
Usage:
SR400, SR500/T all

€125.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30137B
KEDO Fork Stabiliser 'Full Black', easy mounting without fork removal, with manufacturer's certificate, fits with original front fender
Usage:
SR400FI, SR500

€89.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50682KT
KEDO Mounting Set for Oil Cooler Type 'SLIM' (item 50180/50180JG additionally required), includes bracket and small parts incl. oil lines
Usage:
TT500, XT500

€64.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50605KT
KEDO Mounting Set for Oil Cooler Type 'SLIM' (item 50180/50180JG additionally required), includes bracket and small parts incl. oil lines
Usage:
SR500/T (not suitable for SR400FI)

€59.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50180JG
Jagg Oil Cooler 6 Row, black, size approx. 200x54x33mm, connections for oil pipe item 90091/90144 (10mm), M6 fixings with distance 90mm

€252.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
91517
K&N Racing Air Filter RC-0981, oval chrome cap, flange diameter 54mm, fits item KTH-10049
Usage:
Universal, SR500 mit Art. KTH-10049

€69.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
91514
K&N Pre-Filter, for extra protection in extreme conditions (dusty terrain, flat track), for e.g. item 91555, dry / requires K&N oil item 91500
Usage:
suitable for round K&N racing filters with diameter 89, 102mm, length up to 152mm

€33.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List