Rear turn signal bracket for 10mm bolts, stainless steel, for turn signals with M8- and M10 mounting, position may not allowed in your country

The indicator brackets from Two Hands Motorcycles skilfully integrate your indicators into the rear of your conversion. Thanks to the well thought-out shape, the cables disappear from view. This results in a first-class, tidy appearance.

• Optimum mounting of your indicators for a tidy rear end
• High-quality stainless steel offers long-lasting durability
• Integrated cable routing
• Compatible for indicators with M8 and M10 mountings

Installation: Plug and Play - quick and easy. First you mount your indicators on the indicator brackets. Then pull a loop through the slotted cable guide using the cable ties supplied.
Now feed your cables through the loop and tighten the cable tie. Now loosen the shock absorbers of your conversion and slide the indicator brackets onto the upper mount, align the brackets and tighten the nuts of the shock absorbers.

Note: The indicator brackets are only compatible with accessory shock absorbers that have enough space for the indicator brackets between the spring washer and the frame. The indicator mounting distance is permissible, but the viewing angle is limited.