JVB-moto LED Headlight Conversion Kit, incl. E-approved insert (low/high beam, parking- and daytime running light), GRP adapter ring and mounting material

Note: This conversion kit consists of vehicle-specific JvB-moto conversion parts and a universal LED headlight insert. Connecting the LED headlight is complicated. It must be individually connected to the existing vehicle electronics. Further items for connection, e.g. item no. No. 41356 or additional switches may be necessary. Due to the low power consumption of the LED headlamp, it is possible that the vehicle's bus system will declare the lighting as defective and display it as a fault in the speedometer. Due to changes in the series by the vehicle manufacturer, it is not possible to prevent such an error message from the outset with a corresponding scope of delivery and to offer a solution in every case.
If you have any doubts regarding installation, please contact an authorised dealer before installation and ask for advice on the problems to be expected.