XT250 - a Product Selection from the KEDO team - XT250 - Product Collections from the KEDO team

XT250 - A product selection from the KEDO team

Much sought-after as a restoration object and light everyday enduro, the little sister of the XT500 has long since stepped out of its shadow. In the YAMAHA range from 1979 to 1990, the quarter-litre XT impresses with its low weight and sensible improvements over the 500. CDI ignition, balance shaft, cantilever suspension. A nice article about the history of the XT250 can be found at our friends from nippon-classic.de.

The XT250 has long had its place in the KEDO team. And because it is so popular with everyone, we have put together a selection of restoration and conversion parts that are particularly close to our hearts:

New

Product SKU:
29049RP
Replica handlebar switch LH, no parking light position, OEM-Comparison-No.4J3-83972-00, suitable for wiring harness 40106-18
Usage:
XT250 (3Y3) with 4 pin female housing and 4 pin male housing (round type connectors)

€69.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
61042
KEDO Engine Guard, 3mm aluminum black coated, rests on rubber buffers, flat bottom plate for easy jacking up, with mounting material
Usage:
XT250 (3Y3)

€47.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
22053
Tool Box Cover (ABS black coloured through) with Wingscrew, OEM reference # 3Y1-28185-00
Usage:
XT250

€18.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
10313
Rear Fender Reinforcement Plate, replaces OEM # 3Y3-21670-00, suitable for orig. fender item 10095, stainless steel black coated
Usage:
XT250

€59.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
33012RP
Cable for Automatic Decompression, incl. extra sheating in the header pipe area, OEM reference # 3Y1-12292-00
Usage:
XT250

€18.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
27939
Bump Stop Side Stand, incl. mounting bracket (to be screwed behind the left passenger footrest), eliminates rattling, protects the stand
Usage:
XT250, XT500

€17.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
29105RP
Fuel Tank Cap, with inner thread (suitable for aluminium tank with external thread), no seal required due to design, simplified venting
Usage:
XT250, TT500'79-/XT500'80-, XT250 (3Y3)

€14.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30216S
KEDO Classic Chain Guard incl. Mounting Material, aluminum black coated
Usage:
XT250

€49.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30506
Rear Wheel Spoke Set Stainless Steel (18', check against Item 27151)
Usage:
XT250 with 18' Rear Wheel, XT350

€89.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30520
Rear Wheel Spoke Set Stainless Steel (17', check against Item 27156)
Usage:
XT250 with 17' Rear Wheel

€89.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30527
Front Wheel Spoke Set Stainless Steel (21'), Alternative see Item 27150
Usage:
XT250

€89.90

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
30584
KEDO HD Stainless Steel Footpegs (Left & Right), for 8mm Bolt (1 Pair), stepping surface approx. 32x68mm
Usage:
XT250, XT550, TT600, XT600

€79.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
40106-18
Replica wiring loom KEDO PLUS, crimped internal connections, incl. matching connectors set (allows original connection on vehicle side if modified)
Usage:
XT250'81-'87

€94.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
91327
Silencer MARVING 'EDR', black, incl. clamp (Not Street Legal)
Usage:
XT250

€235.00

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
91427
Header Pipe, stainless steel, fits MARVING silencer item no. 91327
Usage:
XT250

Add to Wish List

Sold out, sorry!
Product SKU:
41694
Retaining Bracket/Heat Shield for Side Cover, right, OEM reference # 3Y1-14718-00. Order 4x rubber damper item 27729 at the same time if needed.
Usage:
XT250

€28.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41831
Retaining Plate/Heat Shield for Side Cover Right, OEM-reference # 3Y1-14718-00 (please order 4 x item 27729 if necessary)
Usage:
XT250 with MARVING silencer item 91327

€28.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41842
KEDO Heatshield for Header Pipe, 1.5mm stainless steel, black coated, design based on original heat shield, fits Marving rear silencer Art. 91327
Usage:
XT250 with MARVING silencer item 91327

€39.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
41843
Retaining Plate/Heat Shield for Side Cover Right, OEM reference # 3Y1-14718-00 (if necessary pls. order 4 x rubber # 27729 if needed)
Usage:
XT250 with exhaust system WITHOUT mounting for side cover retainer plate

€58.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50094
Mini Licence Plate Bracket for Euro Licence Plate, stainless steel black, incl. mounting material (for strut item 50313 + optional item 50096/50097)
Usage:
XT250 (3Y3 - 2 valve) with Original Mudguard/Reinforcing Plate, tail light item 50506 recommended

€34.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50308
Mini Indicators Adapter for Original M10- Turn Signal Mount, suitable for turn signals with M8 bolts, aluminum black anodized, 1 pair
Usage:
XT250 und XT500-'85 mit Blinkern an Rücklichtkonsole

€24.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50309
Mini Indicator Adapter for Front Turn Signal Bracket/Headlight Bracket, fits turn signals with M8 bolts, aluminum black anodized, 1 pair
Usage:
XT250, XT500

€12.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50550-S
Add-On Kit BASIC for Item 50544/50555 12V Conversion (contains all 12V bulbs, closed SLA battery, flasher relay, horn)
Usage:
XT250, XT500 with OEM headlight

€42.50 €7.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List
Product SKU:
50557
KEDO PlugIn Regulator/Rectifier for 12V Conversion (easy to mount, requires no modification of wiring loom, replaces OEM regulator and rectifier)
Usage:
XT250 (Please order 12V bulbs, battery, horn and flasher relay at the same time if needed. Not suitable in combination with Gel-Batteries)

€73.50

Incl. 19% VAT,excl. Shipping Cost

Add to Wish List